Table of Contents
Advertisement
A
U
T
O
M
A
See section 6.3 for more information on Schedule/
Output Condition options. See section 8 for more
information on how to program modes.
Option [06]: Duration Options
Item ON Steady while Active. When ON, the
Automation item will remain activated until it is
deactivated by the user, a schedule or a PGM output.
Programmed Pulse when Active. Use this option
to trigger devices requiring a trigger pulse, or to
activate an item for a specific length of time. The
Automation item will be activated for the length of
time programmed in the item's Automation Item
Pulse Timer section (programming sections [301]
to [332]). Valid entries are 001 to 255 seconds.
Do not use the Programmed Pulse
When Active feature if Dimming is
enabled. All pulses turn the Automa-
tion item ON.
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
Automation Item
Pulse Timer ...................... sections [301] - [332]
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
Option [07]: Prompt Option 1
Item prompt is "ON / OFF". When users enter
Automation, the VPM5580TC will announce "ON"
or "OFF" for the Automation item's ON and OFF
states. This prompt would be used for devices
such as lights or appliances.
Option [08]: Prompt Option 2
Item prompt is "OPEN / CLOSED". When users
enter Automation, the VPM5580TC will announce
"OPEN" and "CLOSED" for the Automation item's
ON and OFF states . This prompt would be used for
applications such as curtains and door openers.
Option [09]: Prompt Option 3
Item prompt is "SETBACK ON / SETBACK OFF".
When users enter Automation, the VPM5580TC will
announce "SETBACK ON" and "SETBACK OFF"
for the Automation item's ON and OFF states. This
prompt is only for Automation items and will not be
announced for any thermostats connected and
programmed as described in section 9.
T
I
O
N
I
T
firealarmresources.com
E
M
P
R
O
G
Only turn on one of options 07, 08 or
09. If more than one option is ON, the
system will use the first enabled
option. If none of the options are ON,
the system will use option 07.
Option [10]: Zone Follower Option
Zone Follower Enabled. Turn this option ON if the
Automation item will be following the status of a
zone. See section 6.9 for further instructions on
programming Automation items to follow zones.
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
Automation Item Options sections [131] - [286]
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
6.6 Assigning Automation Items
to Schedules
There are 16 Automation schedules in the
VPM5580TC which determine the ON time, OFF
time and Day Mask. See section 7, Automation
Schedule Programming for information on
programming the schedules. To program an
Automation item to follow a particular schedule,
turn ON the option corresponding to the number of
the schedule (e.g. turning ON only option 01,
programs the Automation item to follow only
schedule number 1).
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
Schedule Programming .. sections [030] - [077]
Automation Item
Schedule Assignment ..... sections [132] - [289]
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
6.7 Assigning Automation Items
to Modes
Mode assignment gives users control over groups
of Automation items programmed for scheduled or
event initiated operation. You can assign any
Automation item to one or more of 8 modes.
Users can turn modes on or off using the Automation
menu. If the Follows Schedule/Output only if a
Mode is ON option (section [133]:[05]) is enabled,
when a user turns on one or more modes to which
the item is assigned, the Automation item will
activate at the scheduled times or when an event
occurs. If all of the modes an item is assigned to are
OFF, the item will not activate.
16
R
A
M
M
I
N
G
Advertisement
Table of Contents
