Canon STAPLER SORTER-L1/MS-C1 Service Manual page 68

CHAPTER 2 OPERATIONS AND TIMING
4. Controlling the bin shift motor rotations
The bin shift motor is used to drive the lead cams and the motor is controlled to rotate
intermittently according to the copy speed data from the copier.
The micro-computer on the sorter controller PCB controls the bin shift motor as follows:
• At the time of copy delivery: The roll of the bin is moved to and stopped at the level section
of the lead cam. However, in the case of a medium-/large-size sheets, the roll of the bin is
moved to the slope section of the lead cam and the bin is moved up by 6 mm.
• At the time of copy feed: shifts the bin unit by 1 bin.
The micro-computer on the sorter controller PCB controls the bin shift motor rotation so that
the bin unit can shift by 1 bin while no copy is delivered.
Bin shift motor(M4)
Lead cam home
position sensor(PI1)
Roll position on
lead cam
Bin
2-44
COPYRIGHT © 1998 CANON INC. CANON STAPLER SOTRER-L1 MS-C1 REV.0 NOV. 1998 PRINTED IN JAPAN (IMPRIME AU JAPON)
On for medium-/large-size paper only.
Slope Level
Up Stop Stop
Slope Level
Up Stop Stop
Figure 2-507
Slope section if medium-/large-size paper.
Up if middle-/large-paper.