Canon STAPLER SORTER-L1/MS-C1 Service Manual page 18

CHAPTER 1 GENERAL DESCRIPITON
C. Resupply of staples to stapler
When staples in the staple cartridge have exhausted, the STAPLE RESUPPLY LED blinks.
Then fill the stapler with new staples in the following procedure.
Caution:
Installing and removing the staple cartridge repeatedly may cause a staple jam. Therefore,
advise customers not to remove the staple cartridge except when resupplying staples or at the
time of staple jam.
1) Open the stapler unit cover.
2) Remove the staple cartridge.
3) Remove the emptied staple case.
1-10
COPYRIGHT © 1998 CANON INC. CANON STAPLER SOTRER-L1 MS-C1 REV.0 NOV. 1998 PRINTED IN JAPAN (IMPRIME AU JAPON)
(Stapler sorter only)
Figure 1-404
Figure 1-405