Canon STAPLER SORTER-L1/MS-C1 Service Manual page 139

Signal sent from sorter to copier
Name of signal
Standby signal • Indicates that the sorter is
(STB)
Old original sort • Indicates that a signal for the
signal (ODS)
Sheet delivery • Indicates that the sorter is
signal (SD)
Reverse sorting • Indicates that the sorter is in
signal (BS-ON)
Staple operation • Informs that stapling
signal
(STPL-ON)*1
Sorter down • Informs improper operation
signal (DOWN)
Sorter error • Indicates that an error
signal (SER)
Staple door open • Indicates that the door of the
signal
(DROPN)*1
Alarm (ALRN) • Indicates the stacking
Jam signal • Informs that paper jam
(SJAM)
*1 Stapler sorter only.
COPYRIGHT © 1998 CANON INC. CANON STAPLER SOTRER-L1 MS-C1 REV.0 NOV. 1998 PRINTED IN JAPAN (IMPRIME AU JAPON)
Meaning/function
ready for feeding
last copy of an original is
being processed
performing delivery
operation
reversal sorting mode
operation is going on.
of sorter
condition that can put the
sorter out of operation has
occurred.
stapling assembly is open.
condition or that the stapler
has an error.
occurred in sorter
Set timing
• At the end of
initialization or at
the end of
processing of a
signal for the last
copy of an original
• Upon receipt of a
processing signal
for the last copy of
an original
• Upon activation of
the sorter delivery
sensor
• When starting
reversal sorting
• When starting
operation
• When the condition
at left exists
• When the condition
at left exists
• When the door of
the stapling
assembly is open.
• When the condition
at left exists
• When the condition
at left exists
APPENDIX
Reset timing
• Upon receipt of a
processing signal
for the last copy of
an original or at
sorter start
• After the end of
processing a signal
for the last copy of
an original
• Upon de-activation
of the sorter
delivery sensor
• When starting
normal sorting
• When ending
operation
• When the door of the
stapling assembly is
closed.
• After resetting an
error.
• After resetting an
error.
A-19