Canon STAPLER SORTER-L1/MS-C1 Service Manual page 124

4. Operation in staple sort mode (Stapler sorter only)
• Conditions: A4 size, 2 documents, 3 copies
Copy start key ON


Sequence
Copier resist roller
ON signal(REGD)
Paper detection sensor
(PI5)
Feed motor
(M2)
Bin shift motor(M4)
Read cam home position
sensor(PI1)
Bin unit shift home position/
Lower limit detection sensor
(PI3)
Guide bar swing motor
(M3)
Guide bar HP sensor
(PI6)
Staple motor(M5)
Staple swing motor
(M1)
Stapling operation home
position sensor (PI7)
Stapler unit home position
switch (SW1)
*1 Only when the copy start key is turned ON and the bin unit is not at the lower limit position, the bin shift motor rotates and the bin lowers to the lower limit position.
*2 Meanwhile, the guide bar is moved to the turnout position and stands by there until copies are delivered.
A-4
         
Forward
*1 (lifting)
Forward
(Prior shift)
Forward Forward Reversal Forward
Putting Putting
*2 Turnout Turnout
copies in order copies in order
Forward
Reversal
(lifting) (lowering)
Reversal
(Prior shift)
Reversal Forward Reversal Forward Reversal Forward
Putting Putting Putting
Turnout Turnout
copies in order copies in order copies in order
COPYRIGHT © 1998 CANON INC. CANON STAPLER SOTRER-L1 MS-C1 REV.0 NOV. 1998 PRINTED IN JAPAN (IMPRIME AU JAPON)
Reversal
(lowering) Forward Forward
Turnout
For- For- For-
ward ward ward
Reversal Reversal Reversal
Forward(putting copies
in order to/turnout) o rward
Reversal(turnout)