Canon STAPLER SORTER-L1/MS-C1 Service Manual page 49

2. Feed stationary jam
Copy paper does not leave the delivery sensor within a specific period of time after the paper
sensor (PI5) has detected paper.
3. Power ON jam (remaining jammed copies detected)
If the delivery sensor is ON when the POWER switch of the copier is turned ON, the SJAM
signal is issued.
4. Door open jam
If the stapler unit cover of the sorter is opened during operation, the SJAM signal will be
generated.
When the COPY START key is pressed after the jam has been detached, the remaining number
of copies will be automatically copied and delivered to the sorter by the work of the reset
mechanism. If a jam occurs in the copier, the sorter stops operation after all the copies moving
through the sorter have been delivered to their respective bins.
COPYRIGHT © 1998 CANON INC. CANON STAPLER SOTRER-L1 MS-C1 REV.0 NOV. 1998 PRINTED IN JAPAN (IMPRIME AU JAPON)
Feed motor(M2)
Paper detection
sensor(PI5)
Jam signal(SJAM)
a:Copy paper length(mm) ÷copier paper derivery speed(mm/sec.) x1.5sec
Figure 2-306
CHAPTER 2 OPERATIONS AND TIMING
a a
Normal Abnormal
2-25