Canon STAPLER SORTER-L1/MS-C1 Service Manual page 37

4) All copies have been made.
5) A new document is placed and reverse sorting is
executed. (*)
6) The above operations are repeated for the number
of documents to be copied.
7) After completion of copying, the guide bar returns
to the home position, and the operation ends.
* If no document feeder is used, the bin unit returns to the home position each time the COPY
START key is pressed; therefore, reverse sorting is not executed.
COPYRIGHT © 1998 CANON INC. CANON STAPLER SOTRER-L1 MS-C1 REV.0 NOV. 1998 PRINTED IN JAPAN (IMPRIME AU JAPON)
Figure 2-211
Figure 2-212
If the copier requests stapling, the following operations will be performed:
CHAPTER 2 OPERATIONS AND TIMING
2-13