Fitting The Carrying Ring; Mounting The Deflector - Stihl FS 160 Instruction Manual

7 Fitting the Carrying Ring

► Use a suitable tool to push the slide to the end
of the slot (see illustration).
2
► Press down the throttle trigger lockout (1) and
squeeze the throttle trigger (2) (full throttle) –
this sets the throttle cable correctly.
7 Fitting the Carrying Ring
7.1 Polymer Version
0458-323-8721-D
1
1
For position of carrying ring see "Main Parts".
► Push the carrying ring (1) over the drive tube.
► Insert the M5 nut in the hex recess in the car‐
rying ring.
► Fit the M5x14 screw.
► Line up the carrying ring.
► Tighten down the screw firmly.
8

Mounting the Deflector

8.1 Use the Right Deflector
1
WARNING
Deflector (1) is approved for mowing heads only
and must therefore be mounted before fitting a
mowing head.
2
English
71