Stihl FS 160 Instruction Manual page 68

English
5.2.3 Fitting the throttle cable retainers
NOTICE
Do not kink the throttle cable or lay it in tight radii
– make sure the throttle trigger moves freely.
16
13
15
► Press one throttle cable retainer (13) into the
upper hole (14) and one into either of the
lower holes (15).
► Press the third retainer (13) into the hole (16)
in the clutch housing cap.
5.2.4 Adjusting the throttle cable
► Check adjustment of throttle cable – see chap‐
ter on "Adjusting the Throttle Cable".
68
14
13
13
5.3 FS 220, FS 280, FS 290 –
Mounting handle support and
bike handle
5.3.1 Mounting the handle support
► Remove the seven mounting screws from the
support (1) and take away the front part of the
support.
3
5 Mounting the Bike Handle
1
2
0458-323-8721-D