Stihl FS 160 Instruction Manual page 77

9 Mounting the Cutting Attachment
9.12 Shredder Blade 270-2
9.12.1 Mounting the cutting attachment
► Fit the guard ring for mowing applications.
4
2
b
b
a
► Place the shredder blade (1) in position – the
cutting edges must point upwards.
WARNING
Collar (a) must locate in the cutting attachment's
mounting hole (b).
9.12.2 Securing the cutting attachment
► Fit the thrust washer (2) – convex side must
face up.
► Fit the guard ring (3).
► Block the shaft.
► Screw the mounting nut (4) on to the shaft
counterclockwise and tighten it down firmly.
WARNING
If the mounting nut has become too loose, fit a
new one.
NOTICE
Remove the tool used to block the shaft.
9.12.3 Removing the cutting attachment
► Block the shaft.
► Unscrew the mounting nut clockwise.
0458-323-8721-D
3 3
1
► Pull the cutting attachment with its mounting
hardware off the gearbox.
9.13 Circular Saw Blades 200 and
225
9.13.1 Aligning the cutting attachment
Cutting edges of circular saw blades must point
clockwise.
9.13.2 Mounting the cutting attachment
► Fit the guard ring for sawing applications.
2
b
a
► Place the cutting attachment (1) in position.
English
4
3
1
77