Stihl FS 160 Instruction Manual page 65

5 Mounting the Bike Handle
5.1.1 Mounting the Handlebar
6
4
2
► Fasten the handlebar (1) at a distance (A) of
approx. 40 cm ahead of the engine on the
shaft (2)
► Place the clamp (3) and handle support (4)
against the shaft
► Fit the handlebar (1) in the handle support –
the rubber handle must be on the left (viewed
from the engine)
► Place the clamp (5) on the handle support
► Insert the screws (6) through the holes in the
parts and screw them into the clamp (3) as far
as they will go
► Align the handlebar
► Tighten the screws
0458-323-8721-D
6
5
1
3
A
5.1.2 Mounting the Control Handle
9
7
8
► Take out the screw (7) – the nut (8) remains in
the control handle (9)
► Push the control handle with the throttle trig‐
ger (10) facing toward the gearbox onto the
end of the handlebar (1) until the holes (11)
align
► Insert and tighten the screw
English
10
11
1
11
65