Network - Graco SaniForce STU Operation

Network

Network Network
To reduce the risk of injury due to electric
shock, remove power to the control panel
before entering the control panel to make
connections for measurement devices.
Use the Network page to configure the STU for
network communication.
Currently, the system is only configured to
communicate through Ethernet/IP (EIP) protocol
to a remote programmable logic controller (PLC).
Contact Graco Customer Support for information
regarding network communication protocols.
Description
Icon/Field Description Description
Icon/Field Icon/Field
DHCP DHCP DHCP
Check to enable Dynamic Host Configuration Protocol for the network connection.
IP IP IP Address Address
Address The current IP Address of the system is displayed here. If DHCP is disabled, these
fields become editable to enter a static IP address.
Subnet Subnet Mask Subnet Mask Mask The current Subnet Mask utilized by the system is displayed here. If DHCP is
disabled, these fields become editable to enter a Subnet Mask.
Enable Enable Enable Check to enable EIP network communication.
Ethernet/IP
Ethernet/IP Ethernet/IP
Remote IP IP IP
Remote Remote
Enter the IP Address of the remote PLC for the system to talk to.
Address Address Address
Save Save Save
The Save button will be active if the IP Address, Subnet Mask, or the Remote IP
Address have been edited. Press the Save button to save the edited value before
leaving the Network screen. Changes may be lost if the Save button is not pressed.
If network communication is enabled, restart the system to resume network
communication after saving a value in the Network settings.
Override Override Override Check to stop reading values driven by the remote PLC into the system. If a
Remote
Remote Remote sequence is running, select the Override Remote box to stop the sequence and put
the system in standby.
Ethernet/IP Ethernet/IP Ethernet/IP Shows if the active communication is connected or disconnected from the remote
Status
Status Status PLC.
3A5416L
Triplex Sales
1-847-839-8442
www.triplexsales.com
Electro-pneumatic Control Panel Display Screens
59