Graco SaniForce STU Operation page 36

Hide thumbs Also See for SaniForce STU:
Table of Contents

Advertisement

Electro-pneumatic Control Panel Display Screens
Icon / / / Field
Field
Description
Description
Description
Icon
Icon
Field
Current
Current Recipe
Current
Recipe
Recipe
Name of the recipe selected for unloading this tote. Click in this field to
display the recipe selection screen.
Start
Start
Start
Begin tote unloading at the current state of the automatic sequence. If the
sequence was stopped before completing, the tote unloading resumes at the
point where the unloading was stopped.
Stop
Stop
Stop
Stop tote unloading. If the automatic sequence is not complete, the tote
unloading status is retained so that the sequence can be completed if started
again.
Reset
Reset
Reset
Resets the automatic sequence state, deflates the seal, and if "Auto Raise" is
selected in the current recipe, will raise the ram.
Auto Sequence
Auto
Auto
Flashes in the upper-left corner of the screen next to the date and time
once the automatic sequence has been activated. Once the sequence is fully
enabled, the icon will also flash over the Start button.
NOTE: If the Start button is released too soon during the loading process,
NOTE:
NOTE:
then the sequence will stop. The icon will still flash next to the date and time
to show that loading started, but did not finish. To continue the automatic
sequence, press and hold the Start button until the icon flashes over the Start
button.
Partial
Partial
Partial Tote
Tote
Tote
Available settings:
Batching
Batching
Batching
If checked, unload the batch size specified in the Batch Amount field. If
unchecked, unloading will not automatically stop until the tote has been
emptied.
Ram plate position in the tote.
Note:
Note: The red line indicates the approximate plate position at which the Tote
Note:
Low status flag will be set.
Available statuses:
Condition not met
Condition met
Seal Inflated
Inflated
The ram plate seal is inflated.
Seal
Seal
Inflated
System Loaded
Loaded
System
System
Loaded
The pump is primed and ready to evacuate the tote. This is based on the
pump primed timer.
Tote
Tote Low
Tote
Low
Low
Ram assembly has reached the Tote Low position.
Tote
Tote Empty
Tote
Empty
Empty
Ram assembly has reached the Tote Empty position.
36
Triplex Sales
1-847-839-8442
www.triplexsales.com
AUTO
AUTO SEQUENCE
AUTO
Sequence Enabled
Sequence
Enabled
Enabled
Partial tote
Not a partial tote
STATUS MESSAGES
STATUS
STATUS
SEQUENCE
SEQUENCE
MESSAGES
MESSAGES
3A5416L

Advertisement

Table of Contents
loading

Table of Contents