Graco SaniForce STU Operation page 33

Specialty key Specialty Specialty key definitions key definitions definitions
Key Description
Key Key Description Description
Exit Exit Exit
Exit the keyboard or keypad. If the entry has not been saved, any displayed entry
shown in the top field of the keyboard or keypad is lost.
Backspace Backspace Backspace
Erase the last character of the displayed entry in the top field of the keyboard or
keypad. This key will erase one character each time it is pressed, or multiple if
pressed and held.
Enter
Enter Enter
When the desired value has been entered in the top field of the keyboard or keypad,
press the Enter key to save the value in the selected field on the display screen.
Shift
Shift Shift
The shift key is a toggle between upper- and lower-case letters. When pressed,
the selected case is used on each key selected until the Shift key is pressed again.
Switching screens will reset the shift to lowercase on the new screen.
Polarity Polarity Polarity
This key toggles the number in the number keypad between positive and negative.
Function Keys Keys
Function Function Keys
Key Key Key Description Description Description
Run Run Run
Select the run screens.
• Automatic
• Manual
Recipes Recipes Recipes
Create or edit recipes.
• Material Recipes
• Container Recipes
Logs Logs Logs
View available logs.
• Event Log
• Job Log
Settings Settings Settings
Configure the STU and connected devises.
• System Configuration Screen: Edit system configuration
• I/O Screen: Edit feedback and I/O settings, view I/O status
• Network Screen: Configure settings for network communication
• About: Display system and software information
3A5416L
Triplex Sales
1-847-839-8442
www.triplexsales.com
Electro-pneumatic Control Panel Display Screens
33