Graco SaniForce STU Operation page 39

Icon/Field Description Description Description
Icon/Field Icon/Field
Pump Pump Pump Slow
Press to run the pump at a slow speed.
Seal Seal Seal Inflate
Press to inflate the ram plate seal.
Stop seal
Stop Stop
Stop inflating or deflating the seal. To resume, press the desired seal action
button: inflate or deflate.
Seal Seal Seal Deflate
Press to deflate the ram plate seal.
Current Current Current Job
Details of the current batch. This element is only active if feedback has been
enabled on the I/O Settings Screen.
Complete Complete Complete Job
Press to mark the current batch as complete. Do not press if the intention
is to restart the current batch again.
Air Assist
Air Air
Press and hold to blow air between the ram plate and the product to break
the adhesion between the two. The ram plate seal should be deflated before
performing this operation.
NOTE: Air assist will not operate unless Ram Up is also selected.
NOTE: NOTE:
Ram Ram Ram Up
Momentarily press to raise the ram assembly. The ram will continue raising
until the ram has reached the top of its travel, unless manually stopped by
pressing Ram Hold.
Ram Ram Hold Ram
Momentarily press to keep the ram at the current location.
NOTE: NOTE: NOTE: This is an active hold and the system may momentarily energize Ram Up
to keep the platen from drifting. Active hold is enabled for 5 seconds after any
Pump, Ram, Seal, or Air Assist command.
Ram Jog
Ram Ram
Press and hold to lower the ram assembly. Releasing the button will stop
lowering the ram.
Ram Down
Ram Ram
Momentarily press to lower the ram to the lowest position. The ram will
continue lowering until the ram has reached the bottom of its travel, unless
manually stopped by pressing Ram Hold.
3A5416L
Triplex Sales
1-847-839-8442
www.triplexsales.com
Slow Slow
Seal Control
Seal Seal
Inflate Inflate
seal action action
seal action
Deflate Deflate
Batch Information Batch Batch
Job Job
Job Job
Air Assist Air Air
Assist
Assist
Ram Ram Control Ram
Up Up
Hold Hold
Jog
Jog
Down
Down
Electro-pneumatic Control Panel Display Screens
Control
Control
Information Information
Assist Assist
Control Control
39