Graco SaniForce STU Operation page 43

Icon/Field
Icon/Field Icon/Field
Container Recipe Container Container Recipe Recipe
Default Batch Default Default Batch Size Batch Size Size
Pump Slow Slow Pressure Pressure
Pump Pump Slow Pressure
Pump Pump Fast Pump Fast Fast Pressure Pressure Pressure
Air Air Assist Air Assist Pressure Assist Pressure Pressure
Seal Seal Pressure Seal Pressure Pressure
Ram Up Up Pressure Pressure
Ram Ram Up Pressure
Ram Down Down Pressure Pressure
Ram Ram Down Pressure
Ram Ram Jog Ram Jog Jog Pressure Pressure Pressure
Seal Partial Partial Pressure Pressure
Seal Seal Partial Pressure
3A5416L
Triplex Sales
1-847-839-8442
www.triplexsales.com
Electro-pneumatic Control Panel Display Screens
Description Description Description
Select from the list of user-defined container recipes.
Select a value that is indicative of the normal size of a batch of the
product being evacuated. The value can be larger than the contents of the
container. In this case, one or more container changes may be required to
complete the batch.
Select the air pressure to be applied to the pump when running in Pump
Slow Speed. Slow Speed runs automatically when loading a new container
of material to prime the pump, and at the very end of an empty container.
Select the air pressure to be applied to the pump when running in pump
fast speed. Fast speed is run to evacuate the bulk of the material from
the container.
Select the air pressure to be applied under the ram plate to aid in
unsticking the ram plate from the material or the bottom of an empty tote.
Select the air pressure to be applied to the seal while inside the container.
Always choose the lowest pressure that achieves the desired result. Too
much pressure reduces the life of the seal and creates excessive frictional
force opposing movement of the ram. Too little force may cause material
to leak past the seal.
Select the air pressure to lift the ram plate out of the container. Choose
the lowest pressure that raises the ram without lifting the container.
Select the air pressure to push the ram down against the product during
evacuation. Always use the lowest pressure that achieves the desired
result. Too much down pressure will cause material leakage around the
inflatable seal.
Select the air pressure to be applied to the ram when jogging downward.
Select the air pressure to be applied to the inflatable seal when the ram
plate is approaching an overfull container. Choose the lowest pressure
that achieves the desired result. Too much Seal Partial Pressure can cause
inflatable seal damage during entry into the container, or may even cause
the seal to burst.
Save
Save Save
Save the current values displayed. If this screen is exited without saving,
any changes made to the screen are lost.
Back Back Back
Return to the recipe list screen. If this screen is exited without saving, any
changes made to the screen are lost.
43