Préparation Du Support De Fixation Et De Cloison Sèche - FireplaceXtrordinair 864 TRV 31K CleanFace Manual

Finalizing the Installation
Préparation du support de fixation et de cloison sèche

Les deux supports et les trois supports de cloison sèche sont livrés à plat. Assurez-vous de plier (et
sécuriser) les supports et les supports de cloison sèche comme indiqué ci-dessous.
The two standoffs are shipped flat.
Bend the three drywall supports up 90 degress (the
outer two are concealed when the standoffs are flat).
When in place, the
standoffs and drywall
supports should look
as shown to the
right.
© Travis Industries
(for qualified installers only)
Bend both standoffs as shown below.
Remove the screw from the top of the
fireplace and secure the standoff as shown.
1/17/2019 – 1483-FR
13
864 31K CF Install