Printer Condition Settings - Sharp AR-M162 Operation Manual

WEB FUNCTIONS OF THE MACHINE

Printer condition settings

Factory default settings are indicated in bold.
Default settings
Item
Copies
Orientation
Default Paper Size
Default Paper Source
Disable Blank Page Print Enable, Disable
2-Sided Print
ROPM*
PCL settings
Item
Symbol Set
Font
Line Feed Code
Wide A4
PostScript settings
"PostScript Settings" only appears when the PS3 expansion kit is installed.
Item
Print PS Errors
24
Settings
1-999 This is used to select the number of copies.
Portrait, Landscape This sets the orientation of the printed page. Select [Portrait]
when the image is longer in the vertical direction, or [Landscape]
when the image is longer in the horizontal direction.
A3, B4, A4, A4R, B5, This sets the default paper size used for printing. Even if the
set size of paper is not in any of the trays, the printed image
B5R, A5, Ledger,
is formed in accordance with this setting.
Legal, Foolscap,
*Factory default setting is A4 in some regions.
Letter*, Letter-R,
Invoice
Auto, Tray 1, Set the default paper tray.
*Selections available depend on the trays that are installed.
Tray 2*, Tray 3*,
Tray 4*, Bypass
(Manual), Bypass (Auto)
When this is set to "Enable", blank pages are not printed.
1-Sided, When [2-Sided (Book)] is selected, two-sided printing takes place
so as to allow binding at the left side. When [2-Sided (Tablet)] is
2-Sided (Book),
selected, two-sided printing takes place so as to allow binding at
2-Sided (Tablet)
the top. (Only for models that support two-sided printing.)
Enable, Disable This enables the ROPM function. When enabled, multi-page
print jobs are stored in memory before printing, and thus the
computer does not need to repeatedly send the print data
when multiple copies are printed.
* This setting is only effective when the dual function board is
Settings
Select one of 35 sets. This specifies which country's characters (PCL symbol set)
are assigned to certain of the symbols in the character code
list. The factory default setting is [PC-8].
Select one internal or This specifies which PCL font to use for printing. One font can
be specified from among the internal fonts and expansion
one expansion font.
fonts (when the barcode font kit or the Flash ROM kit is
installed). The factory default setting is [0:Courier].
CR=CR; LF=LF; This specifies the line break code by means of a combination
of the "CR" (return) code, "LF" (line break) code, and "FF"
FF=FF, CR=CR+LF;
(page break) code. The factory default setting is printing
LF=LF; FF=FF,
based on the transmitted code. The setting can be changed
CR=CR; LF=CR+LF;
by selecting one of four combinations.
FF=CR+FF,
CR=CR+LF;
LF=CR+LF;
FF=CR+FF
Enable, Disable This setting can be enabled to print 80 lines on A4 size paper
with each line 10CPI font (English characters). When the
setting is disabled (a checkmark does not appear), each line
is 78 characters long.
Settings
Enable, Disable
Description
installed.
Description
Description
When this setting is enabled, an error description is printed
each time a PostScript error occurs.