Fitting The Print Image To The Paper - Sharp AR-M162 Operation Manual

PRINT

FITTING THE PRINT IMAGE TO THE PAPER

The printer driver can adjust the size of the print image to match the size of the paper loaded in the machine.
Follow the steps shown below to use this function. The explanation below assumes that you intend to print a ledger
or A3 size document on letter or A4 size paper.
To open the printer driver, see
The "Fit To Paper Size" setting is not available when "N-Up Printing" is selected.
Note
☞
PRINTING MULTIPLE PAGES ON ONE PAGE (page 7)
1
Click the [Paper] tab in the printer
driver setup screen.
2
Select the original size (Ledger or A3)
of the print image in "Paper Size".
or
3
Click on the [Fit to Page] checkbox.
or
8
"BASIC PRINTING" (page 3).
4
Select the size of the paper (Letter or
A4) that is loaded in the machine from
"Fit to Paper Size".
The size of the print image will be automatically
adjusted to match the paper loaded in the
machine.
Paper Size: Ledger or A3
Fit To Paper Size: Letter or A4
Ledger or A3 size
document
(Paper Size)
Letter or A4 size
paper
(Fit To Paper Size)