Selecting The Color Mode; Selecting The Resolution - Sharp AR-M162 Operation Manual

Selecting an AB original size
4
Select the original size with the [ ] or
[ ] key.
To return to the selection of inch original sizes, press
the [ ] key and return to step 2.

SELECTING THE COLOR MODE

After placing the original, you can select an appropriate color mode for the original type. Place the original in the
document feeder tray or on the document glass (steps 1 to 3 on
The factory default setting for the color mode is "COLOR". To change the color mode, follow these steps.
1
Press the [COLOR MODE] key.
DATA COPY EXPOSURE PAPER ZOO
SCAN
COLOR MODE RESOLUTION ADDR
FAX PROGRAM RESOLUTION ADDR
The color mode selection
screen appears.
2
Select the color mode with the [ ] or
[ ] key.
GH
PQR
DUPLEX
SPECIAL FUNCTION
DUPLEX SCAN
The selected mode is
highlighted.

SELECTING THE RESOLUTION

The scanning resolution can be selected. After selecting scan mode and placing the original (steps 1 to 3 on
20), perform the procedure below.
The factory default setting for the resolution is "150dpi" (e-mail/FTP mode).
If you need to change the resolution, follow these steps.
1
Press the [RESOLUTION] key.
COPY EXPOSURE PAPER ZOOM AUTO
SCAN COLOR MODE RESOLUTION ADDRESS FORM
FAX PROGRAM RESOLUTION ADDRESS BROADC
The resolution selection
screen appears.
ORIGINAL SIZE
AB
A3
B4
A4
COLOR MODE
COLOR
GRAY
B/W
COLOR MODE
COLOR
GRAY
B/W
RESOLUTION
100dpi
150dpi
200dpi
300dpi
HOW TO USE THE NETWORK SCANNER FUNCTION
5
Press the [OK] key.
You will return to the base
OK
screen and the selected original
size will appear in the original
display.
To cancel a manual original size setting,
Note
press the [CA] key.
If it is not possible to select the actual original
size, select a size that is larger than the actual
original size. If a smaller size is selected, part
of the original will not be transmitted.
page 20) and then follow the steps below.
COLOR : Select this mode for color originals.
GRAY : Select this mode for a black and white
photograph or when a monochrome image is
needed.
B/W : Select this mode when you wish to scan a
photo in monochrome or when you wish to
make text clearer.
3
Press the [OK] key.
You will return to the base
screen and the selected mode
BACK OK
will appear in the color mode
display.
GHI
Two-sided scanning is not possible when
Note
"COLOR MODE" is set to "COLOR" or "GRAY".
2
Select the resolution with the [ ] or
[ ] key.
GH
PQR
DUPLEX
SPECIAL FUNCTION
DUPLEX SCAN
The selected resolution is
highlighted.
page
RESOLUTION
100dpi
150dpi
200dpi
300dpi
27
2