Product Configurations - Sharp AR-M162 Operation Manual

Notes
• Considerable care has been taken in preparing this manual. If you have any comments or concerns about the
manual, please contact your nearest SHARP Service Department.
• This product has undergone strict quality control and inspection procedures. In the unlikely event that a defect or
other problem is discovered, please contact your dealer or nearest SHARP Service Department.
• Aside from instances provided for by law, SHARP is not responsible for failures occurring during use of the product
or its options, or failures due to incorrect operation of the product and its options, or other failures, or for any
damage that occurs due to use of the product.
The display screens, messages, and key names shown in the manual may differ from those on the actual machine due to
product improvements and modifications.

PRODUCT CONFIGURATIONS

This product series consists of the models indicated below. The product configuration varies by model.
The explanations and illustrations in this manual generally use the AR-M207 (with the optional RSPF installed).
Model
AR-M162
AR-M207
With the RSPF installed
Appearance Copying speed Paper trays
16 copies/min. One (250 x 1)
20 copies/min. Two (250 x 2)
Optional trays
250-sheet paper
feed unit (AR-D24)
2 x 250-sheet paper
feed unit (AR-D25)
(As of the end of October, 2004)
3