Editing And Deleting Programmed Transmission Destinations - Sharp AR-M162 Operation Manual

BEFORE USING THE NETWORK SCANNER FUNCTION

Editing and deleting programmed transmission destinations

To edit or delete programmed destinations, click [Destination] in the menu frame of the Web page.
1
Click [Destination] in the menu frame
of the Web page.
2
In the Destinations List, click the
checkbox of the destination that you
want to edit or delete.
If you attempt to delete a programmed destination in the following situations, a warning message will appear and
Note
deletion will not be possible.
• The destination is included in a group.
If the destination is being used for a current transmission, cancel the transmission or wait until it is completed and
then delete the destination. If the destination is included in a group, delete the destination from the group and
then delete the destination.
Printing lists of programmed destinations
You can print lists showing the destinations that have been programmed.
The following lists can be printed.
• Print individual list: Shows the information programmed in e-mail, FTP, desktop, and group destinations.
• Print group list: Shows only the information programmed in group (e-mail) destinations.
1
Click [Destination] in the menu frame
of the Web page.
2
To print the individual list, click [Print
Individual List] at the bottom of the
destinations list.
10
3
To edit the selected destination, click [Edit]
at the bottom of the Destinations List.
When finished, be sure to click [Submit] to save
your changes.
4
To delete the selected destination,
click [Delete] at the bottom of the
Destinations List.
3
To print the group list, click [Print
Group List] at the bottom of the
destinations list.
The programming screen
of the destination
selected in step 2
appears. Edit the
information in the same
way as you initially stored
it.
A message appears
asking you to confirm the
deletion. Click [Yes] to
delete.