Printer Condition Settings; Printer Default Settings - Sharp MX-M564N Operation Manual

Printer Condition Settings

The Printer Condition Settings are used to configure basic printer settings and settings for printing from a DOS
application. To configure the settings, touch the [Printer Condition Settings] key.

Printer Default Settings

The default settings are used to set advanced print conditions for printing in an environment where the print driver is not
used (such as printing from MS-DOS or from a computer that does not have the provided print driver installed).
When printing using the printer driver, the printer driver settings take precedence over the printer condition settings.
Settings
Item
Copies
Orientation
Default Paper Size
Default Output Tray
Default Paper Type
Initial Resolution Setting
Disable Blank Page Print
2
Line Thickness*
2-Sided Print
3
N-Up Print*
4
Fit To Page*
Output
Quick File
*1 When a finisher is installed.
*2 This setting is used to adjust the line width of vector graphics (black & white printing only). Except for CAD and other specialized
uses, there is normally no need to change this setting. When "0" is selected, all lines are printed at a width of 1 dot.
*3 Paper sizes that can be used with this function are 11" x 17", 8-1/2" x 14", 8-1/2" x 11", A3, B4, and A4. (This function may not
take effect with some print methods.)
*4 Only effective when printing PDF, JPEG, and TIFF files.
1 - 999 sets
• Portrait
• Horizontal
11" x 17", 8-1/2" x 14", 8-1/2" x 13", 8-1/2" x 11", 7-1/4" x 10-1/2", 5-1/2" x 8-1/2", A3,
B4, A4, B5, A5, 8k, 16k
• Center Tray
1
• Offset Tray*
• Right Tray
Plain Paper, Letter Head, Pre-Printed, Pre-Punched, Recycle Paper
• 600 dpi
• 600 dpi (High Quality)
• (Disabled)
• (Enabled)
0-9
• 1-Sided
• 2-Sided (Book)
• 2-Sided (Tablet)
• 1-Up
• 2-Up
• 4-Up
• (Use Fit to Page)
• (Do not use Fit to Page)
• (Use Print per Unit)
• (Do not use Print per Unit)
1
• Staple Position* : None, 1 Staple at Back, 2 Staples, 2 Staples (Top)
• (Use Punch)
• (Do not use Punch)
• (Disabled)
• (Enabled)
7-23
SYSTEM SETTINGS
Selections
Contents