ZyXEL Communications XS3800-28 User Manual page 212

28-port 10gbe l3 managed switch
Hide thumbs Also See for XS3800-28:
Table of Contents

Advertisement

Advanced Application > Link Aggregation Status
Fig ure 160
The following table describes the labels in this screen.
Table 78 Advanced Application > Link Aggregation Status
L ABEL
DESC RIPT IO N
Group ID
This field displays the group ID to identify a trunk group, that is, one logical link containing multiple
ports.
Enabled Ports
These are the ports you have configured in the
The port numbers displays only when this trunk group is activated and there is a port belonging to
this group.
Synchronized
These are the ports that are currently transmitting data as one logical link in this trunk group.
Ports
Aggregator ID
Link Aggregator ID consists of the following: system priority, MAC address, key, port priority and
port number.
The ID displays only when there is a port belonging to this trunk group and LACP is also enabled
for this group.
Criteria
This shows the outgoing traffic distribution algorithm used in this trunk group. Packets from the
same source and/or to the same destination are sent over the same link within the trunk.
src - m a c
dst- m a c
src - dst- m a c
and destination MAC addresses.
means the Switch distributes traffic based on the packet's source IP address.
src - ip
means the Switch distributes traffic based on the packet's destination IP address.
dst- ip
src - dst- ip
and destination IP addresses.
Status
This field displays how these ports were added to the trunk group. It displays:
Sta tic
L AC P
Chapter 17 Link Aggregation
means the Switch distributes traffic based on the packet's source MAC address.
means the Switch distributes traffic based on the packet's destination MAC address.
means the Switch distributes traffic based on a combination of the packet's source
means the Switch distributes traffic based on a combination of the packet's source
– if the ports are configured as static members of a trunk group.
– if the ports are configured to join a trunk group via LACP.
XS3800-28 User's Guide
212
screen to be in the trunk group.
L ink Ag g re g a tio n

Advertisement

Table of Contents
loading

Table of Contents