Rapid Spanning Tree Protocol Status - ZyXEL Communications XS3800-28 User Manual

13.4 Ra pid Spa nning T re e Pro to c o l Sta tus
The Spanning Tree Protocol status screen changes depending on what standard you choose to
implement on your network. Click
panel to display the status screen as shown next. See
RSTP.
Note: This screen is only available after you activate RSTP on the Switch.
Fig ure 129
(Standalone Mode)
Fig ure 130
(Stacking Mode)
The following table describes the labels in this screen.
Table 62 Advanced Application > Spanning Tree Protocol > Spanning Tree Protocol Status: RSTP
L ABEL
Configuration
Bridge
Bridge ID
Hello Time
(second)
Chapter 13 Spanning Tree Protocol
Adva nc e d Applic a tio n
Advanced Application > Spanning Tree Protocol > Spanning Tree Protocol Status: RSTP
Advanced Application > Spanning Tree Protocol > Spanning Tree Protocol Status: RSTP
DESC RIPT IO N
Click
C o nfig ura tio n
settings on the Switch.
refers to the base of the spanning tree (the root bridge).
Ro o t
Switch may also be the root bridge.
This is the unique identifier for this bridge, consisting of bridge priority plus MAC address. This ID
is the same for
Ro o t
This is the time interval (in seconds) at which the root switch transmits a configuration
message. The root bridge determines
XS3800-28 User's Guide
>
Spa nning T re e Pro to c o l
Section 13.1 on page 167
to specify which STP mode you want to activate. Click
and if the Switch is the root switch.
O ur Bridg e
He llo T im e
171
in the navigation
for more information on
RST P
is this Switch. This
O ur Bridg e
, and
Ma x Ag e Fo rwa rding De la y
to edit RSTP
.