ZyXEL Communications XS3800-28 User Manual page 447

The following table describes the labels in this screen.
Table 198 Advanced Application > Wol Relay
L ABEL DESC RIPT IO N
Wol Relay
UDP Enter a UDP port number that magic packets are sent through.
The most common port for transmission is UDP port 9.
Source VLAN Enter the source VLAN ID where the magic packet originates from.
Destination VLAN Enter the destination VLAN ID where the magic packet will be sent to.
Add Click
Add
changes if it is turned off or loses power, so use the
save your changes to the non-volatile memory when you are done configuring.
Cancel Click Cancel to begin configuring this screen afresh.
Clear Click
C le a r
Index This field displays the index number of the rule.
UDP This field displays the UDP port of the rule.
Source VLAN This field displays the source VLAN ID of the rule.
Destination VLAN This field displays the destination VLAN ID of the rule.
Select an entry's check box to select a specific entry. Otherwise, select the check box in the
table heading row to select all entries.
Delete Click
De le te
Cancel Click
C a nc e l
Chapter 46 Wol Relay
to save your changes to the Switch's run-time memory. The Switch loses these
to reset the fields to the factory defaults.
to remove the selected entry from the summary table.
to clear the check boxes.
XS3800-28 User's Guide
447
link on the top navigation panel to
Sa ve