ZyXEL Communications XS3800-28 User Manual page 523

28-port 10gbe l3 managed switch
Hide thumbs Also See for XS3800-28:
Table of Contents

Advertisement

The following table describes the related labels in this screen.
Table 244 IP Application > ARP Setup > Static ARP
L ABEL
DESC RIPT IO N
Active
Select this check box to activate your rule. You may temporarily deactivate a rule without
deleting it by clearing this check box.
Name
Enter a descriptive name (up to 32 printable ASCII characters) for identification purposes.
IP Address
Enter the IP address of a device connected to a Switch port with the corresponding MAC
address below.
MAC Address
Enter the MAC address of the device with the corresponding IP address above.
VID
Enter the ID number of VLAN to which the device belongs.
Port
Enter the number of port to which the device connects. In stacking mode, the first field is the
slot ID and the second field is the port number.
Add
Click this to create a new entry or to update an existing one.
This saves your changes to the Switch's run-time memory. The Switch loses these changes if it is
turned off or loses power, so use the
changes to the non-volatile memory when you are done configuring.
Cancel
Click
C a nc e l
Clear
Click
C le a r
Index
This field displays the index number of an entry. Click an index number to change the settings.
Active
This field displays
Name
This field displays the descriptive name for this entry. This is for identification purposes only.
IP Address
This is the IP address of a device connected to a Switch port with the corresponding MAC
address below.
MAC Address
This is the MAC address of the device with the corresponding IP address above.
VID
This field displays the VLAN to which the device belongs.
Port
This field displays the port to which the device connects.
Select an entry's check box to select a specific entry. Otherwise, select the check box in the
table heading row to select all entries.
Delete
Click
De le te
Cancel
Click
C a nc e l
Chapter 57 ARP Setup
Sa ve
to begin configuring this screen afresh.
to set the above fields back to the factory defaults.
when the entry is activated and
Ye s
to remove the selected entry from the summary table.
to clear the check boxes.
XS3800-28 User's Guide
523
link on the top navigation panel to save your
when it is deactivated.
NO

Advertisement

Table of Contents
loading

Table of Contents