Near Camera Presets For Cu360 App - Avaya Collaboration Unit CU360 Release Notes

© 2021 Avaya Inc. All rights reserved

Near Camera Presets for CU360 App

A camera preset is an item including:
A camera preset can be stored and recalled for the local (also called embedded or near) camera,
and if the remote party or the meeting supports and enables the Far End Camera Control (FECC)
protocol, also a far preset (camera of the remote party, or the camera of the active speaker in a
meeting) can be recalled and stored.
With CU360, it is possible to store and recall presets for the local (also called near) cameras
(embedded and USB cameras) .
The near camera supports movements and zooming through digital Pan Tilt Zoom (PTZ)
commands, when the Camera tracking feature is not active.
In the GUI, zoom commands (zoom in, zoom out keys ) for the near, or far, camera are available
through the remote-control (or a mouse) when the CU360 app is in foreground, while pan and tilt
commands are available (arrow keys) only in the Control Camera page).
To switch between controlling the near or the far camera, you can also press the Control far/near
camera on the remote-control.
PTZ and presets commands for far/near cameras are also available through the Web interface, or
through AT commands.
Presets are available also for an additional USB camera, if Control Camera is enabled.
How to store or recall a preset - GUI
To store or recall presets positions for the near camera on the device graphical user interface
(GUI), go to
Release Notes for Avaya Collaboration Unit CU360
o
A camera selection (for instance HD1 or USB)
o
Horizontal and vertical position of the camera frame (physical or digital)
o
Zoom factor of the camera
The CU360 Video-collaboration Application 73