Network Connectivity - Avaya Collaboration Unit CU360 Release Notes

© 2021 Avaya Inc. All rights reserved
Any third-party app displaying the camera will benefit of this feature.
•
•

Network Connectivity

Before configuring your device for the first time, assure that the device is connected to an Ethernet
(LAN) or Wi-Fi network.
To connect the unit to the network using Wi-Fi, you need to select the proper Wi-Fi network in the
Android Settings and insert the credentials and the authentication type.
Please be aware that it is strongly suggested to NOT connect both Ethernet and Wi-Fi network.
Please note that an IP address is automatically assigned to the unit if you connect the unit to the
network using the Ethernet and your network is equipped with a DHCP server,
Wi-Fi and Bluetooth settings can be accessed in
[G ] C
UI ONFIGURE
[G ] C
UI ONFIGURE
Release Notes for Avaya Collaboration Unit CU360
Important
When using the CU360 App, you can simultaneously move the far camera and the local
camera
Toggle far/near to select "Far Camera". Move far camera using the arrows in
o
the remote-control.
o
Activate the mouse pointer with the
while moving the mouse pointer to move the camera. Camera must be
zoomed in.
The CU360 App will restore its latest used PTZ position, discarding the movements done
while using other apps.
>Q S
UICK ETUP
> A > [A
DVANCED DMINISTRATOR
key and long press the
PIN] > S >S >S
YSTEM ECURITY ETTINGS
key
Avaya CU360 Setup and Control 27