Pan-Tilt-Zoom For Any App - Avaya Collaboration Unit CU360 Release Notes

Hide thumbs Also See for Collaboration Unit CU360:
Table of Contents

Advertisement

© 2021 Avaya Inc. All rights reserved

Pan-Tilt-Zoom for Any App

You can also Pan-Tilt-Zoom the embedded HD camera with the CU360 remote-control when a
generic application is using it.
To Zoom in/out the camera, press the Zoom +/- keys on the remote-control.
To Pan-Tilt the camera, once the camera is zoomed in, activate the mouse pointer on the remote-
control (the small led blue light is on), then keep the "Toggle near/far camera" key pressed while
moving the mouse pointer up/down/left/right to force the corresponding movements of the camera.
Release Notes for Avaya Collaboration Unit CU360
Important
Camera Auto Framing is applicable only to the embedded HD camera or to the additional
USB camera.
Camera Auto Framing is available for third-party apps and in USB Bar mode
Only faces in front of the camera are detected.
o
Check that the room is properly lighted.
o
Check that the room does not contain mirrors or other highly reflecting
surfaces, or pictures on the walls/furniture depicting faces.
o
Assure that the distance of the people from the camera is not more that 3.0-
3.5 meters, and that the faces are towards the camera.
o
Faces covered by masks could be not detected in this release.
See Optimal Huddle Room Setup for supported arrangement of the room. Up to 4
different faces can be recognized for Auto Framing.
Avaya CU360 Setup and Control 26

Advertisement

Table of Contents
loading

Table of Contents