Power On/Off The Unit; Optimal Huddle Room Setup - Avaya Collaboration Unit CU360 Release Notes

© 2021 Avaya Inc. All rights reserved
•
•
•
•
•
•

Power On/Off the Unit

•
[O
N THE DEVICE
•
[O
N THE DEVICE
system or to wake it up.
•
[O
N THE DEVICE
device is in a call.
•
[O
N THE REMOTE
LEDs around the camera alight
•
[O
N THE REMOTE
"Power off/Restart/Screenshot menu". Activate the mouse pointer on the remote-control and
select "Power off".

Optimal Huddle Room Setup

For a typical huddle room, up to 3m x 3m and with up to 3-4 people attending the conference, a
CU360 device placed on top of a 1080p or 4K monitor provides the best experience. The audio
captured from the embedded device's mics is enough, and the monitor provides the audio output
Release Notes for Avaya Collaboration Unit CU360
Place the CU360 above your TV, and use the hinge to secure it.
Plug the HDMI cable into the TV and CU360.
Connect a LAN / Ethernet cable (or you can configure a Wi-Fi network later). A PoE
Splitter accessory, not included in the box, is available. See the support site.
To connect a second display to CU360, please use only a qualified powered USB Type-C
to HDMI adapter, see the support site.
Plug in the CU360 power adapter.
Use the rubber cap to cover the camera for privacy.
Hold the power button on the back of the unit to switch on/off the system.
]
Quickly press the power button on the back of the unit to put in standby the
]
Do not unplug/shutdown the power to turn the system off, especially when the
]
Long press the 'Power' key to power-on the device, until you see the
- ]
CONTROL
Long press the 'Power' key to power-off the device, until you see the
- ]
CONTROL
.
Avaya CU360 Setup and Control 10