Crestron TS-70 Series Product Manual page 122

After Reboot is selected, a dialog box is displayed asking whether the touch screen should be
restarted. Select Yes to restart the device or No to cancel the restart.
Restore
Select Restore to restore the touch screen configuration settings to their default values.
After Restore is selected a dialog box is displayed asking whether the device settings should be
restored. Select Yes to restore the settings or No to cancel the restore.
Update Firmware
Select Update Firmware to upgrade the touch screen firmware manually with a downloaded
PUF (package update file). The Firmware Upgrade dialog box opens.
Firmware Upgrade Dialog Box
To upload a firmware PUF through the web configuration interface:
NOTE: Visit the appropriate device product page or
Library to download the latest firmware PUF.
1. Select Browse, and then navigate to the firmware PUF on the host computer.
2. Select the firmware PUF, and then select Open.
3. Select Load to load the PUF to the touch screen. The upload progress is shown in the
dialog box.
4. Once the touch screen has completed the firmware upgrade, select OK.
Select the x button to close the Firmware Upgrade dialog box at any time during the upgrade
process. Selecting the x button before the PUF is uploaded to the touch screen cancels the
upgrade.
Download Logs
Select Download Logs to download the touch screen message logs for diagnostic purposes. The
message files download as a compressed .tgz file. Once the compressed file is downloaded,
extract the message log files to view them.
Manage Certificates
Select Manage Certificates to manage any certificates that are installed on the touch screen.
For more information on certificate management, refer to
118 • TS-70 Series
www.crestron.com/Support/Resource-
802.1x Configuration (on
Product Manual — Doc. 8555F
page 151).