Crestron TS-70 Series Product Manual page 103

The touch screen attempts to connect to the WAP using the provided credentials. If a connection
is established, connection details for the WAP are shown with a green check mark to the left of
Current Connection.
Wi-Fi WAP Selection Screen (Connection Successful)
If the connection fails, a failure message is displayed. Tap Connect to a different access point to
return to the Connect to a Wi-Fi Access Point (1-2-3) screen.
NOTE: If four WAPs have already been assigned, the Wi-Fi WAP Selection screen indicates
that the WAP list is full. Tap Delete an access point? to display the Manage Wi-Fi Access
Points screen, where an existing WAP may be deleted, or tap < BACK to cancel adding the
new WAP. For more information, refer to
Tap < BACK to return to the Wi-Fi Setup screen.
Product Manual — Doc. 8555F
Manage Wi-Fi Access Points (on the next page).
TS-70 Series • 99