Material Specifications - Pitney Bowes AddressRight DA70S Operator's Manual

Material Specifications

Approved Media
The paper types listed below are approved for use with the printer.
Please note that the dimensional limits above apply in all cases, and
that all media (flats, envelopes, postcards, catalog envelopes, etc.)
must be without windows, unstuffed and unsealed.
• White Wove
• Bond paper
• Recycled paper
• Coated paper
• Card stock
• Brown kraft
• Manila
Material Notes
• Envelopes have a flap along the long edge and are processed
by the printer non-flap edge first. Envelopes may have either a
diagonal or straight edge along the envelope flap.
• Booklets are defined as media having physical dimensions 6 x 9"
(15.25 x 23cm) or larger. Booklets have an opening along their
long edge which is covered by a flap with an adhesive seal.
• Catalog envelopes have an opening along their short edge which
is closed by a flap with an adhesive seal.
• Postcards have no folds or bends. The printable side may have a
higher surface roughness than the non-printable side.
• Self-malers may be of "C," "Z," or half-folded construction. They
may not exceed the maximum allowable thickness as specified
on the previous page and must be tabbed per postal regulations.
• A catalog may consist of multiple pages bound by adhesive or
tabs on the feed edge or at 90 degrees with respect to the feed
edge.
• Sheet stock may consist of 16 to 28 lb. (60 to 105g/m
well as 60 to 80 lb. (220 to 300g/m
thickness constraints specified above apply.
SV61665 Rev. C
Specifications • Appendix A
) coated stock. The size and
2
) bond as
2
A-9