Roof panel controls
Deactivating the alarm system motion sensors
Pressing button A deactivates the motion sensing function of the alarm
system. When this function is deactivated, the LED on the button
flashes for about 3 seconds and then turns off.
2
Deactivating the anti-lift alarm system
Pressing button B deactivates the anti-lift alarm system. When this
function is deactivated, the LED on the button flashes for about 3
seconds and then turns off.
A
B
48
Tyre pressure calibration button
To calibrate the system, turn the ignition key to position II (refer to
page 50), then press the key C for a time ranging from 4 to 10 seconds.
The system will take a maximum of 20 minutes to complete the
calibration procedure with the vehicle in motion.
The situation detected will then be shown on the display.
For further information, refer to the paragraph "Tyre pressure and
temperature monitoring system" on page 132.
C