Using Ansi Characters - Monarch MPCL II Manual

MPCLII Optional Fonts
Using ANSI Characters ––––––––––––––––––––––––––––––––––––––
To use one of these characters in your format, press and hold
the Alt key and type in the character codes for your chosen
character using the numeric keypad. To determine the
character code, add the column number and row number for
the character. For example, to produce the ÿ character, you
would press Alt 255 (column 15 + row 240). Keep in mind
that the character may appear differently on your screen than
it may appear when printed, because screen fonts and printer
fonts are not necessarily the same.
Refer to the chart on the following page for the available ANSI
characters.
2-2