Operating Instructions
2.3
[For BL-C20A] Using Wireless LAN
Wireless communication is possible by adjusting the settings of the wireless LAN
to those of the wireless router. Take a note of the settings and save them for
reference. For more information about wireless settings, please refer to http://
panasonic.co.jp/pcc/products/en/netwkcam/.
1.
Click [Wireless] on the Setup page.
2.
Set each parameter for Wireless Configuration.
Setting
SSID
Communication
mode
Even if "802.11g exclusive" is in use, the existence of other wireless devices using a 2.4
*1
GHz bandwidth —including 802.11b wireless devices— may make the baud rate on the
802.11g slower.
•
The SSID must be set to match the SSID your wireless
router or wireless LAN uses. The SSID is limited to 32
characters (alpha numeric) and is case sensitive.
•
802.11b: There are a lot of 802.11b-compliant products
and they are inexpensive. They are widely prevalent, so it
is likely that 802.11b will match your existing wireless
devices.
•
802.11b/g (default): This mode supports both the 802.11b
and 802.11g wireless LAN standards. It is the
communication mode that is easiest to install on your
existing wireless LAN.
•
802.11g exclusive: This mode communicates using
802.11g only. It does not support the mixed standard mode
of 802.11b/g, so it allows the use of original features of
802.11g.
*1
Description
36