Nortel NN43118-100 User Manual page 25

stand in the channels provided and do not interfere with the tilt
mechanism as shown in
5. Connect the Ethernet cable to the LAN Ethernet connection. If using
an AC power adapter, plug into the nearest outlet. Your system
administrator should provide you with correct installation information.
Note: The IP Phone 2007 supports both AC power and Power over
Ethernet options, including IEEE 802.3af standard power. To use
local AC power with the optional universal AC adapter,
countryspecific AC power cables are separately orderable. To use
Power over Ethernet, where power is delivered over the CAT5-e
Ethernet cable, it must be supported by the LAN infrastructure.
Figure 5 shows connections on the IP Phone 2007.
Figure 5: IP Phone 2007 connections
The following figures show how to connect the phone components.
Connecting the components
Figure 8 on page 27 .
25