AGFA DR 600 User Manual page 26

26 | DR 600 | Introduction
The status indicator on the remote control is blinking slowly to indicate
that battery charging is ongoing.
The status indicator on the remote control is unlit when the battery is fully
charged.
Charging time
Operation time when fully charged 2.5 hours continuous operation or 1
Standby time when fully charged
Remote control status indicator light
Table 1: Status of the remote control
Blinking fast
Lighting up while pressing
any button
Table 2: Status of the remote control when it is in the charging unit
Blinking slow
Off
3261K EN 20210708 0808
maximum 10 hours
day normal use
7 days
communication with the X-ray system is inter-
rupted
battery charge level is low
battery charging is ongoing
battery is fully charged