AGFA DR 600 User Manual page 163

Automatic position
Table 24: Automatic position
Moving to an Automatic Position
The default X-Ray system position for the selected exposure is sent to the
modality and displayed on the software console and on the tube head display,
for automatic positioning of the X-Ray system.
To move to the predefined position:
Press and hold the automatic positioning button.
The status of the automatic positioning is displayed on the Software
Console and in the position screen of the tube head display:
Table 25: Positioning status
The movement of the ceiling suspension can be performed in two ways:
DR 600 | Software Console and Tube Head Display | 163
The name of the target automatic position is
displayed.
To select another automatic position from the
list of configured positions, use the + and -
buttons.
A preview of the target automatic position is
displayed.
Use the automatic positioning button to move
the system to the target position.
Quickly select on the tube head display the
parking position or the cleaning position.
Movement is active.
The icon is displayed as long as user presses and holds the auto-
matic positioning button.
The target position is reached successfully.
The target position is not reached due to failure or when the
user releases the automatic positioning button early.
3261K EN 20210708 0808