AGFA DR 600 User Manual page 170

170 | DR 600 | Software Console and Tube Head Display
Table 30: Tracking status
2. Adjust the wall stand bucky height, the height of the X-ray tube or the
alpha rotation of the X-ray tube head.
The corresponding component (X-ray tube or wall stand bucky) is moving
accordingly.
The lock button controls the behaviour of the position tracking after the
exposure is made.
Table 31: Locking the position tracking
Related Links
Collision indicator
Emergency stop button
3261K EN 20210708 0808
Note: The movement of the X-ray tube is automatically stopped
if the distance between the X-ray tube head and the table top
would become too small (less than 10 cm).
Position tracking is not active for the next exposure. It can
be activated again by pressing the position tracking but-
ton.
Position tracking is kept active for the next exposure.
on page 185
on page 40
Tracking is activated.