Call Group Dialing - Muratec F-360 Operating Instructions Manual

Advanced features
3
Use the numeric keypad to enter the three-digit identifier for the speed-dial
number you want to dial. As the machine dials, it shows the number on the
:
LCD
Note: Remember that your fax machine's monitor speaker is not a speakerphone.
If you dialed using the monitor speaker, pick up the handset to speak to the
person that answers!
Note: If the call fails, and you used
hang up.
3.6
/ to dial, press
MONITOR CALL MONITOR

Call group dialing

If you frequently send the same fax message to more than one location, store the
one-touch key(s) or speed-dial number(s) into a group.
After you store, you can send the same fax to many different locations by pressing
/
SPEED DIAL GROUP
Entering or changing a call group
1
Press
MENU
/ to
CALL
Note: If a group number other than 01 appears on the
you have already entered numbers for 01.
2
Using the cursor key, select the group number in which you want to store a
number or change a previously stored number.
Note: You can select the group number by directly entering that two-digit
identifier code. When entering the identifier code for group numbers
less than 10, you must enter leading zero to make two digits. For exam-
ple, 01-09.
3
Press
ENTER
4
Enter all the one-touch number(s) or the speed-dial number(s) you want to
store into the group number by pressing the one-touch key or
/
SPEED DIAL
inserted between each number.
Your can show only 30 characters at a time. To view characters beyond
LCD
those 30, press
5
When all numbers are entered, press
.
, 1, 3, 0, 1, . The shows the empty group number:
ENTER LCD
. The shows:
LCD
and the numeric keypad. A comma will be automatically
GROUP
to scroll to the left or to scroll to the right.
to store it.
ENTER
, it means that
LCD