Setting Sleep Mode (Energy Saving Mode); Setting Paper Source; Adjusting The Machine's Clock; Setting 2-Bin Tray (Option) - Muratec F-360 Operating Instructions Manual

Setting Sleep mode (Energy saving mode)

Default setting: On
Note: All lamps on the control panel will not be off, even when the machine is
LED
in the sleep mode.
If you want to change the Sleep mode to OFF, you can set it here.
1
Press , 2, 1, 0, 5, . The
MENU ENTER
2
Using the cursor key, select the mode you want.
Then press to save the setting.
ENTER

Setting paper source

Default setting: 1st cassette: Fax/Copy, Bypass Tray: Fax/Copy
1
Press , 2, 1, 0, 8, . The
MENU ENTER
2
Select the item you want to change the setting using the cursor key and then
press . The will show:
ENTER LCD
3
Select "Fax/Copy", "Fax" or "Copy" as you want. Then press
"Fax/Copy": Select this if you want to use the paper source you selected for
faxing, list (or report) printing and copying.
"Fax": Select this if you want to use the paper source you selected for
faxing and list (or report) printing.
"Copy": Select this if you want to use the paper source you selected for
copying only.
"Not Used": Select this if you do not want to use the paper source you
selected.
shows:
LCD
shows:
LCD
.
ENTER
If you want to change another setting, repeat steps 2 and 3.
If you do not want to change any more settings, proceed to step 4.
4
Select "Exit" then press
ENTER

Adjusting the machine's clock

You can adjust the machine's clock here.
1
Press , 2, 1, 0, 7, . The
MENU ENTER
2
Use the numeric key to enter the current date and time to adjust the clock.
Then press .
ENTER

Setting 2-bin tray (Option)

Default setting: Copy exit: Lower tray, Fax exit: Upper tray, List exit: Upper tray
You will set where the printed paper emerges in this operation.
Note: This operation will appear only if the optional 2-bin tray has been attached
to your machine.
1
Press , 2, 1, 1, 0, . The
MENU ENTER
2
Select the item you want to change the setting by using the cursor key and
then press .
ENTER
3
Select "Upper" or "Lower" as you want. Then press
If you want to change another setting, repeat steps 2 and 3.
If you do not want to change any more settings, proceed to step 4.
4
Select "Exit" then press
ENTER
Changing the default settings
to save the setting.
shows:
LCD
shows:
LCD
.
ENTER
to save the setting.
4.9