Printing A List Of One-Touch Numbers; One-Touch Phone Dialing; One-Touch Fax Dialing - Muratec F-360 Operating Instructions Manual

3
Press . The shows:
ENTER LCD
Important: If you want to quit without erasing the one-touch number
you've selected, press [No]. The fax will return to step 2.
4
Press [Yes] to erase the number.
To erase another one-touch number, repeat steps 2–4.
Otherwise, press to return to standby mode.
STOP

Printing a list of one-touch numbers

Forgot which number is stored in which one-touch key? Just print a list of your one-
touch numbers. The list includes each key's number, the Location
fax/telephone number you've stored in the key.
To print a list of one-touch numbers, press

One-touch fax dialing

To dial a fax call using a one-touch number:
1
Place the the document in the
2
Adjust resolution and contrast if necessary.
3
Press the one-touch key in which you've stored the number.
What happens next depends on whether you specified memory transmission or
real time transmission:
If you specified Quick Memory transmission:
• Your fax machine scans the first page of your document into memory, then dials
the other fax machine.
• While dialing, your machine scans the other documents into memory.
• The shows the Location and the document's width and resolution settings:
LCD ID
Note: If the one-touch key doesn't have a Location
• When the other machine answers, your fax transmits the scanned document
directly from memory. (To review Quick memory transmission, see page 2.2.)
(if any) and
ID
, 5, 1, 0, 5, .
MENU ENTER
.
ADF
, the number appears.
ID
If you specified normal memory transmission:
• Your fax machine scans your entire document into memory first, then dials the
other fax machine.
• The shows the Location and the document's width and resolution settings:
LCD ID
Note: If the entry doesn't have a Location
• When the other machine answers, your fax transmits the document directly from
memory. (To review Memory transmission, see page 2.2.)
If you specified real time transmission:
• Your fax machine dials the other fax machine.
• The shows the Location and the document's width and resolution settings:
LCD ID
Note: If the entry doesn't have a Location
• When the other machine answers, your fax feeds the document through its scan-
ner, transmitting as it goes. (To review Real time transmission, see page 2.3.)

One-touch phone dialing

To dial a phone call using a one-touch number, you must have an optional handset
attached to your machine. (Contact your authorized Muratec dealer to order an
optional handset.)
To make the call:
1
Obtain a dial tone by doing one of the following:
• Lift the optional handset
• Press / to use the monitor speaker
MONITOR CALL
2
Press the one-touch key in which you've stored the number. As the machine
dials, it shows the number on the
Note: Remember that your fax machine's monitor speaker is not a speakerphone.
If you dialed by using the monitor speaker, pick up the handset to speak to
the person that answers.
Note: If the call fails, and you used
hang up.
Advanced features
, the number appears.
ID
, the number appears.
ID
:
LCD
/ to dial, press
MONITOR CALL MONITOR
/ to
CALL
3.3