Table of Contents
Advertisement
6.2.3
via MAC Address
When NetBIOS is installed (by default on Windows systems), the MAC address that is printed
on a label on the side of the MECip-Sec housing can be used. The MAC address is also shown
in the ETS listing of Discovered Interfaces and in the properties window (of the network
device) in the Windows explorer. Due to name resolution, it is mandatory to establish
communication by Host name. Hereby, activation of NetBIOS is necessary.
Use the MAC address AA-BB-CC-XX-YY-ZZ and the pre-set HTTP port and enter both in the
browser´s URL bar, as described here (without brackets):
Example:
On the side of its housing, MECip-Sec is labelled with MAC address
D0-76-50-11-22-33 and the pre-set HTTP port is 8080. Then, in the web
browser´s URL bar has to be entered "http://knx-iprt-112233:8080/".
Web Front-end
http://knx-iprt-[XXYYZZ]:[HTTP port]/
MECip
SECURE
- 34 -
Advertisement
Table of Contents
