Table of Contents
Advertisement
1.8
Feature Summary
• Device Certificates guarantee only authorized persons can have access to MECip-Sec.
• When the ETS "Secure Commissioning" function is active, configuration data is
downloaded only in encrypted KNX Data Secure format.
• Activation of "IP Backbone Security" for protection of IP routing.
• Configuring MECip-Sec plus devices on the main line from the subline can be switched off.
(This is very useful, when there are sublines that bear a high risk of being misused.)
• MECip-Sec supports long telegrams with up to 240 bytes APDU length. (Both product
series, the MEC couplers and UIM interfaces, can process long messages e.g. for energy
metering applications and visualization purposes, and support Extended Frames.)
• The great advantage, when MECip-Sec replaces a common TP line/area coupler is using a
KNX IP line as a fast KNX backbone instead of a TP backbone.
• MECip-Sec works without external power supply.
• For IP (Secure) Tunneling, four tunneling connections can be realized in parallel. On
activation of Secure Tunneling, the password protection becomes available.
• Settings to increase data throughput and decrease high bus traffic are featured.
• IACK sending on sent out messages is configurable.
• Repetition is configurable for both Physical Telegrams and Group Telegrams.
• To ease commissioning, troubleshooting and fast on-site diagnostics, normal run-time
filtering can temporarily be suspended by a single Function button press. Other lines can
be fully accessed without having to carry out additional ETS downloads. Switching back to
normal run-time filter settings after suspension period expiry is automatic (see
Function). This avoids forgetting to reactivate the settings for normal filtering.
• UPnP Discovery enables discovering MECip-Sec within the IP network.
• ETS recognizes MECip-Sec as bus connection interface by KNXnet/IP Search Request.
• Updating the firmware can easily be accomplished by a web browser.
• The available web front-end provides informative settings and enables to remotely switch
the device into Programming Mode without using the Programming Button.
• With the web front-end, a 60 min busload history diagram can be watched.
• For Security, the web front-end can fully be disabled or be set to display only status info.
• MECip-Sec supports KNXnet/IP, ARP, ICMP, IGMP, HTTP, UPnP discovery, UDP/IP, TCP/IP,
DHCP and AutoIP.
Product Description
MECip
SECURE
Manual
- 13 -
Advertisement
Table of Contents
