Table of Contents
Advertisement
5.3
Subline (KNX TP)
Setting "transmit all" is intended only for testing use. Please do not use this setting for
normal operation.
If the parameter "Send confirmation on own telegrams" is set to "yes", MECip-Sec
systematically sends an ACK on any own routed telegram. For example, since repeaters
do not use filter tables, it is useful to have an ACK sent along with routed telegrams.
Table 11: Subline (KNX TP) Tab Parameter Settings
ETS Parameter
Telegram routing
(Subline -> Main line)
Group telegrams:
Main group 0...13
Group telegrams:
Main group 14...31
Physical telegrams
Figure 16: Subline (KNX TP) Tab Parameters
Settings
[Default Parameter]
Group: filter, Physical: block
Group and Physical: filter
Group: route, Physical: filter
Group and Physical: route
configure
[Group and Physical: filter]
transmit all (not recommended)
block
filter
[filter]
transmit all (not recommended)
block
filter
[filter]
transmit all (not recommended)
block
filter
[filter]
ETS Database
Comment
Routing of Physical Telegrams and
Group Telegrams can be set to 'block'
(no routing), 'filter' (telegrams are routed
according to filtering) and 'route' (all
telegrams are transmitted). To set
telegram routing different as available
here, use 'configure'.
Filtering of Group telegrams (with main
groups 0...13) can be configured to
route all telegrams, no telegrams, or
only telegrams entered in the filter table.
Filtering of Group telegrams (with main
groups 14...31) can be configured to
route all telegrams, no telegrams, or
only telegrams entered in the filter table.
Filtering of Physical telegrams can be
configured to route all telegrams, no
telegrams, or only telegrams according
to their Individual Address.
MECip
SECURE
- 28 -
Advertisement
Table of Contents
