Table of Contents
Advertisement
4.4
Adding Device Certificate
The Device Certificate can be found printed on a side label on the housing. Every KNX Secure
device uses its own Device Certificate. Entering this Device Certificate in ETS is mandatory
before activating or using KNX Security functions.
Please also follow the advice on handling the tear-off part of the side label in chapter
1.7 Safekeeping of Device Certificate.
The Device Certificate can be entered manually and by taking a webcam picture of the QR
code that is additionally contained on the tear-off part of the Device Certificate side label.
Figure 6: Tear-off Part of the Device Certificate Side Label
After opening the project, the Device Certificate list can be edited. In the Security tab under
Project Overview Device Certificates can be added and deleted.
When the Device Certificate list doesn´t contain the Device Certificate of a certain Secure
device, on starting the Secure download into this device following window appears. Then, the
QR code must be scanned, or alternatively, the 36-character code of the Device Certificate
must be entered manually to continue.
Operational Description
Figure 7: Device Certificate List
MECip
SECURE
- 19 -
Advertisement
Table of Contents
