Table of Contents
Advertisement
Settings
ETS Parameter
[Default Parameter]
no
Physical telegrams:
up to 3 repetitions
Repetition if errors
only one repetition
on subline
[up to 3 repetitions]
no
Group telegrams:
up to 3 repetitions
Repetition if errors
only one repetition
on subline
[up to 3 repetitions]
Telegram
if routed
confirmation on
always
subline
[if routed]
yes
Send confirmation on
no
own telegrams
[no]
allow
Configuration from
block
subline (KNX TP)
[allow]
ETS Database
Comment
After subline transmission error (e.g. due
to missing receiver), Physical telegrams
can be not repeated, be repeated only
once, or be repeated for max. 3 times.
After subline transmission error (e.g. due
to missing receiver), Group telegrams
can be not repeated, be repeated only
once, or be repeated for max. 3 times.
Either only routed telegrams to IP main
line are confirmed by an ACK on the
subline or each telegram on the subline
is confirmed by an ACK.
Telegrams sent out to the subline can be
confirmed by an added ACK.
'Block' means MECip-Sec can only be
configured from its main line side and
configuring devices on main line (and
behind) from the subline side is blocked.
MECip
SECURE
- 29 -
Advertisement
Table of Contents
