Main Line (Ip) - TAPKO MECip-Sec Product Description

5.2

Main Line (IP)

Setting "transmit all" is intended only for testing use. Please do not use this setting for
normal operation.
Table 10: Main Line (IP) Tab Parameter Settings
ETS Parameter
Telegram routing
(Main line -> Subline)
Group telegrams:
Main group 0...13
Group telegrams:
Main group 14...31
Physical telegrams
Figure 15: Main Line (IP) Tab Parameters
Settings
[Default Parameter]
Group: filter, Physical: block
Group and Physical: filter
Group: route, Physical: filter
Group and Physical: route
configure
[Group and Physical: filter]
transmit all (not recommended)
block
filter
[filter]
transmit all (not recommended)
block
filter
[filter]
transmit all (not recommended)
block
filter
[filter]
ETS Database
Comment
Routing of Physical Telegrams and
Group Telegrams can be set to 'block'
(no routing), 'filter' (telegrams are routed
according to filtering) and 'route' (all
telegrams are transmitted). To set
telegram routing different as available
here, use 'configure'.
Filtering of Group telegrams (with main
groups 0...13) can be configured to
route all telegrams, no telegrams, or
only telegrams entered in the filter table.
Filtering of Group telegrams (with main
groups 14...31) can be configured to
route all telegrams, no telegrams, or
only telegrams entered in the filter table.
Filtering of Physical telegrams can be
configured to route all telegrams, no
telegrams, or only telegrams according
to their Individual Address.
MECip
SECURE
- 27 -